#        routerboard: yes
#         board-name: NetMetal 5
#              model: RB922UAGS-5HPacD
#      serial-number: 5F8004B07AF8
#      firmware-type: qca9550
#   factory-firmware: 3.22
#   current-firmware: 6.44.6
#   upgrade-firmware: 7.9
# 
#             channel: stable
#   installed-version: 7.9
# 
# Flags: U, F - FLOATING-UNDO
# Columns: ACTION, BY, POLICY
#   ACTION              BY      POLICY
# U user lucas added    flwvlw  write 
#                               policy
# U user admin changed  flwvlw  write 
#                               policy
# U device changed      flwvlw  write 
# U device changed      flwvlw  write 
# U device changed      flwvlw  write 
# U device changed      flwvlw  write 
# U device changed      flwvlw  write 
# U device changed      flwvlw  write 
# 
# software id = 621F-XUP2
#
# model = RB922UAGS-5HPacD
# serial number = 5F8004B07AF8
/interface bridge
add admin-mac=4C:5E:0C:D8:21:BB auto-mac=no comment=defconf name=bridge
/interface wireless
set [ find default-name=wlan1 ] adaptive-noise-immunity=ap-and-client-mode ampdu-priorities=0,1,2,3,4,5,6,7 band=5ghz-onlyac channel-width=20/40/80mhz-XXXX country=no_country_set default-forwarding=no disabled=no frequency-mode=superchannel installation=outdoor max-station-count=7 mode=ap-bridge nv2-security=enabled rx-chains=0,1 ssid=PP-JFxMRC tx-chains=0,1 wds-default-bridge=bridge wds-mode=dynamic wireless-protocol=nv2
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/interface bridge port
add bridge=bridge comment=defconf interface=ether1
add bridge=bridge comment=defconf interface=sfp1
add bridge=bridge comment=defconf interface=wlan1
/ip address
add address=192.168.254.50/29 interface=ether1 network=192.168.254.48
/ip dhcp-client
add comment=defconf interface=bridge
/ip firewall filter
add action=accept chain=input dst-port=8291 log=yes protocol=tcp
/ip route
add dst-address=0.0.0.0/0 gateway=192.168.254.49
/ip service
set telnet port=10023
set ftp disabled=yes
set www disabled=yes
set ssh port=10022
set api disabled=yes
set winbox port=25000
set api-ssl disabled=yes
/system identity
set name=MARCIO
/system note
set show-at-login=no