#        routerboard: yes
#              model: 912UAG-5HPnD
#      serial-number: 4A570246A127
#      firmware-type: ar9340
#   factory-firmware: 3.10
#   current-firmware: 6.44.5
#   upgrade-firmware: 6.44.5
# 
#             channel: long-term
#   installed-version: 6.44.5
# 
# Flags: U - undoable, R - redoable, F - floating-undo 
#   ACTION                                   BY               POLICY             
# 
# software id = 8HD8-FF53
#
# model = 912UAG-5HPnD
# serial number = 4A570246A127
/interface ethernet
set [ find default-name=ether1 ] speed=100Mbps
/interface bridge
add fast-forward=no name=wds-bdg
/interface wireless
set [ find default-name=wlan1 ] adaptive-noise-immunity=client-mode ampdu-priorities=0,1,2,3,4,5,6,7 band=5ghz-a/n basic-rates-a/g="" channel-width=20/40mhz-Ce country=russia2 disabled=no frequency=5865 ht-basic-mcs=mcs-0,mcs-1,mcs-2,mcs-3,mcs-4,mcs-5,mcs-6,mcs-7,mcs-8,mcs-9 ht-supported-mcs="mcs-0,mcs-1,mcs-2,mcs-3,mcs-4,mcs-5,mcs-6,mcs-7,mcs-8,mcs-9,mcs-10,mcs-11,mcs-12,mcs-13,mcs-14,mcs-15" mode=ap-bridge name=wlan3 nv2-preshared-key=ether8ether9 nv2-security=enabled radio-name=Vilmar rate-set=configured rx-chains=0,1 ssid=PP-VLMxMC5 supported-rates-a/g="" tx-chains=0,1 wds-default-bridge=wds-bdg wds-mode=dynamic wireless-protocol=nv2
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip ipsec proposal
set [ find default=yes ] enc-algorithms=aes-128-cbc
/snmp community
set [ find default=yes ] addresses=0.0.0.0/0 name=public-noway
/interface bridge port
add bridge=wds-bdg interface=wlan3
add bridge=wds-bdg hw=no interface=ether1
/ip firewall connection tracking
set enabled=no
/interface wireless align
set filter-mac=4C:5E:0C:1A:BE:53
/ip address
add address=192.168.99.146/29 interface=wds-bdg network=192.168.99.144
/ip dns
set servers=45.236.84.18,45.236.84.19
/ip route
add distance=121 gateway=192.168.99.145
/ip service
set telnet disabled=yes
set ftp disabled=yes
set www port=10080
set ssh port=10022
set api disabled=yes
set winbox port=25000
set api-ssl disabled=yes
/ip smb
set allow-guests=no
/ip ssh
set allow-none-crypto=yes forwarding-enabled=remote
/snmp
set contact=Protek enabled=yes location="General Carneiro/PR" trap-version=2
/system clock
set time-zone-name=America/Sao_Paulo
/system identity
set name="VILMAR x MARCO5"
/system ntp client
set enabled=yes primary-ntp=200.160.0.8 secondary-ntp=200.189.40.8
/system package update
set channel=long-term
/system script
add dont-require-permissions=no name=bkps owner=admin policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive source=":log info \"Starting Backup Script...\"\r\n:global bkfl1 ([/system identity get name] . \"-\" . [:pick [/system clock get date] 7 11] . [:pick [/system clock get date] 0 3] . [:pick [/system clock get date] 4 6] . \".backup\")\r\n:global bkfl2 ([/system identity get name] . \"-\" . [:pick [/system clock get date] 7 11] . [:pick [/system clock get date] 0 3] . [:pick [/system clock get date] 4 6] . \".rsc\")\r\n:if ([/file find name=\$bkfl1] != \"\") do={/file rem \$bkfl1}\r\n:if ([/file find name=\$bkfl2] != \"\") do={/file rem \$bkfl2}\r\n:delay 2s\r\n/system backup save name=\$bkfl1\r\n:log info \"Waiting 5s for backup to complete...\"\r\n:delay 5s\r\n/export file=\$bkfl2\r\n:log info \"Waiting more 5s for export to complete...\"\r\n:delay 5s\r\n:log info \"Backup being emailed...\"\r\n/tool e-mail send to=\"lucianosds@gmail.com\" subject=([/system identity\_get name] . \" Backup\") from=bkp_mikoritks@yahoo.com file=\$bkfl1 server=98.139.235.70 start-tls=yes  user=\"bkp_mikoritks@yahoo.com\" password=\"C40e00*^rI\"\r\n/tool e-mail send to=\"lucianosds@gmail.com\" subject=([/system identity\_get name] . \" Export\") from=bkp_mikoritks@yahoo.com file=\$bkfl2 server=98.139.235.70 start-tls=yes  user=\"bkp_mikoritks@yahoo.com\" password=\"C40e00*^rI\"\r\n:log info \"Finished Backup Script!\""
/system watchdog
set watchdog-timer=no