#        routerboard: yes
#         board-name: BaseBox 5
#              model: 912UAG-5HPnD
#      serial-number: 77CC0725233E
#      firmware-type: ar9340
#   factory-firmware: 3.33
#   current-firmware: 6.44.5
#   upgrade-firmware: 6.44.5
# 
#             channel: long-term
#   installed-version: 6.44.5
# 
# Flags: U - undoable, R - redoable, F - floating-undo 
#   ACTION                                   BY               POLICY             
# 
# software id = YSYS-WLSU
#
# model = 912UAG-5HPnD
# serial number = 77CC0725233E
/interface ethernet
set [ find default-name=ether1 ] speed=100Mbps
/interface bridge
add fast-forward=no name=bdg-wds
/interface wireless
set [ find default-name=wlan1 ] adaptive-noise-immunity=client-mode ampdu-priorities=0,1,2,3,4,5,6,7 band=5ghz-onlyn basic-rates-a/g="" channel-width=20/40mhz-Ce country=russia2 disabled=no frequency=5865 ht-basic-mcs=mcs-0,mcs-1,mcs-2,mcs-3,mcs-4,mcs-5,mcs-6,mcs-7,mcs-8,mcs-9 ht-supported-mcs="mcs-0,mcs-1,mcs-2,mcs-3,mcs-4,mcs-5,mcs-6,mcs-7,mcs-8,mcs-9,mcs-10,mcs-11,mcs-12,mcs-13,mcs-14,mcs-15" max-station-count=1 mode=station-wds nv2-cell-radius=10 nv2-preshared-key=ether8ether9 nv2-security=enabled rate-set=configured rx-chains=0,1 ssid=PP-VLMxMC5 supported-rates-a/g="" tx-chains=0,1 wds-default-bridge=bdg-wds wds-mode=dynamic wireless-protocol=nv2
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/snmp community
set [ find default=yes ] addresses=0.0.0.0/0 name=public-noway write-access=yes
/interface bridge port
add bridge=bdg-wds interface=wlan1
add bridge=bdg-wds hw=no interface=ether1
/interface bridge settings
set allow-fast-path=no
/ip firewall connection tracking
set enabled=yes
/ip settings
set ip-forward=no secure-redirects=no send-redirects=no
/ip address
add address=192.168.99.147/29 interface=bdg-wds network=192.168.99.144
/ip dns
set servers=45.236.84.18,45.236.84.19
/ip route
add distance=1 gateway=192.168.99.145
/ip service
set telnet disabled=yes
set ftp disabled=yes
set www port=10080
set ssh port=10022
set api disabled=yes
set winbox port=25000
set api-ssl disabled=yes
/ip smb
set allow-guests=no
/ip ssh
set allow-none-crypto=yes forwarding-enabled=remote
/snmp
set contact="Acacio Correa <acacio.protek@gmail.com>" enabled=yes location="Protek Informatica, General Carneiro/PR" trap-version=2
/system clock
set time-zone-name=America/Sao_Paulo
/system identity
set name="MARCO 5 x VILMAR"
/system package update
set channel=long-term